Inverted bucket steam trap
Structural features of inverted bucket steam trap
1. All moving parts in the inner cavity are made of stainless steel, which is resistant to wear and corrosion.
2. Since the steam cannot reach the valve seat hole sealed by the water, there is no steam loss and high efficiency and energy saving.
3. The floating bucket is inverted, it will not be damaged or crushed, not afraid of water hammer, and has a long life.
4. There is a vent hole on the top of the inverted barrel. The continuous air exhaust performance is good, and the cold hysteresis and air blockage will not be formed.
5. It is not affected by back pressure and can work well under high back pressure.
6. Reliable work, only two moving parts (lever-and inverted barrel), so there will be no jamming.
7. The valve seat and valve clack are on the top of the valve. The valve clack can allow dirt to pass through during the switch. It has good self-cleaning performance and is free of dirt.