How To Test The Strength Of Antibiotic Valves?

The shell test of a valve is a pressure test conducted on the entire valve shell connected by the valve body and valve cover, with the aim of verifying the density of the valve body and valve cover, as well as the pressure resistance of the entire shell, including the connection between the valve body and valve cover. According to JB/T9092 regulations, shell tests should be conducted using materials at a pressure of 1.5 times the rated pressure at 38 ℃. Shell strength test, test medium pressure of 6.0MPa, maintain the test pressure for a short duration of 1 minute. After the short duration of the test pressure, there should be no leakage in any part of the gate valve. The packing should be tightly maintained to maintain the test pressure. Through the introduction of antibiotic valve manufacturers above, you should know how to test the strength of antibiotic valves!