Stainless Steel Sanitary Manual Clamped Conventional Non-Retention Ball Valve (JN-BLV 2006)
Product Introduction
We are committed to providing Sanitary Tri Clamp Ball Valve, Pipe Fitting Cross, Female Thread Globe Valve and total solutions for our customers. All of the products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world. Our product design follows specialization, efficiency, intelligence and network. Traditional management mode, system structure, design measures and decision-making gist have to go on innovating in order to keep up with the pace of the era. We win the trust of customers with our comprehensive advantages in production technology, product quality, reasonable prices, and timely delivery. We use high-efficiency production, low-cost, and honest service to satisfy customers. We hope to win your trust and affirmation.
Size | L | H | Ø1 | Ø |
3/4" | 105 | 47.5 | 50.5 | 19.05 |
1" | 117 | 60 | 50.5 | 25.4 |
1 1/4" | 125 | 65 | 50.5 | 31.8 |
1 1/2" | 140 | 70 | 50.5 | 38.1 |
45 | 145 | 70 | 64 | 45 |
2" | 160 | 85 | 64 | 50.8 |
57 | 162 | 85 | 77.5 | 57 |
2 1/2" | 177 | 95 | 77.5 | 63.5 |
3" | 200 | 105 | 91 | 76.3 |
3 1/2" | 240 | 110 | 106 | 89.1 |
4" | 280 | 120 | 119 | 101.6 |
Product Description:
Material: 316, 304, 201
Connection mode: clamp type ,welding type
Standards: ISO, DIN, SMS, IDF
Application:
food, beverage, dairy products, cosmetics, pharmacy, bioengineering, etc
Valve Sanitary pneumatic clamp ball valve ISO certified
Main dimensions
Size | L | H | ø1 | ø |
3/4" 4 | 105 | 47.5 | 50.5 | 19.05 |
1" | 117 | 60 | 50.5 | 25.4 |
1 1/4" | 125 | 65 | 50.5 | 31.8 |
1 1/2" | 140 | 70 | 50.5 | 38.1 |
45 | 145 | 70 | 64 | 45 |
2" | 160 | 85 | 64 | 50.8 |
57 | 162 | 85 | 77.5 | 57 |
21/2" | 177 | 95 | 77.5 | 63.5 |
3" | 200 | 105 | 91 | 76.3 |
3 1/2" | 240 | 110 | 106 | 89.1 |
4" | 280 | 120 | 119 | 101.6 |
Product Description
Standard technical parameters of sanitary pneumatic through ball valve
Nominal diameter: Φ 20 - Φ 102
Valve body material: 304, 316, 316L
Connection mode: clamp quick installation type, welding type
Pressure rating: PN1.6MPa
In valve assembly
Valve seat sealing: PTFE: - 30 ℃ ~ 150 ℃
PPL ：-30℃～250℃
Valve core material: 304, 316, 316L
Stem material: 304, 316, 316L
Advantage:
The inner wall of the flow channel is 240grid polished to ensure the smooth flow of the flow channel； Full package PTFE seal, no dead angle, easy to clean；Double layer valve stem packing and counter pressure disc shrapnel device.
Design standards: ISO, DIN, IDF, SMS, 3A
Optional accessories: reversing solenoid valve, limit switch, air filter pressure reducing valve, electric positioner, hand wheel mechanism, holding valve, explosion-proof electrical part can be selected
Applicable media:
food, medicine, packaging machinery, filling machinery, etc
Price：Our price fluctuates with raw materials and exchange rate.Please leave your contact information and give you a new quotation as soon as possible.
Packing: wooden case, wooden pallet or packing method specified by customers.
FQA:
1.What is the installation procedure of 3-piece ball valve?
Before the installation of ball valve: clear the oil, welding slag and all other impurities in the pipeline, check the mark of ball valve, and find out that the ball valve is intact.
(1) Install the valve into the line. Any end of the valve can be installed at the upstream end. The valve driven by handle can be installed at any position on the pipeline. However, ball valves with gearboxes or pneumatic actuators shall be installed vertically, i.e. on horizontal pipes, with the driving device above the pipes.
(2) Install gasket between valve flange and pipeline flange according to pipeline design requirements.
(3) The bolts on the flange shall be tightened symmetrically and step by step.
(4) Connect pneumatic pipeline (when pneumatic driver is used).
(5)Finally, confirm its feasibility.
2.What is the difference between sanitary and industrial ball valves?
Sanitary valves are usually made of du304ss or 316 stainless steel. After processing, they are treated by special methods, which are incomparable to industrial valves in many aspects, such as cleanliness, simple installation and so on. This is the valve specially made for food, medicine and other industries.
Industrial valves are generally based on the use of the need to develop models, mainly in the high temperature and high pressure working environment, long service life and flexible operation mode, the appearance and interior are not sanitary valve, smooth and beautiful, but in many places are sanitary can not be replaced.
Unique technology and product design and development are the strongest support for our Stainless Steel Sanitary Manual Clamped Conventional Non-Retention Ball Valve (JN-BLV 2006)'s large-scale production. Following the marketing guidance and the objective of being a first-class enterprise, we have always trying to improve ourselves. With the high quality of products and excellent reputation, our company has obtained many achievements. In order to improve our product innovation ability, we put forward the product development concept of knowledge driven collaborative innovation.
Hot Tags: sanitary clamped ball valve, China, suppliers, manufacturers, customized, wholesale, quotation, low price, in stock, made in China, Stainless Steel Round Flanged Sight Glass, Flanged Flexible Check Valve, Pipe Tee, Wled Pipe Fittings PL RF Flanges, ASTM Flanged Ball Valve, Outward Opening Manhole Cover Polished
SPEC DATA
Send Inquiry