Nominal Pipe size DN	Dutside diameter at bevel D		Center to end			Center to center		Back to faces
			45° Elbows	90° Elbows		180° Elbows		180° Elbows
			H	F		P		K
	Series A	Series B	Long radius	Long radius	Short radius	Long radius	Short radius	Long radius	Short radius
15	21.3	18	16	38	-	76	-	48	-
20	26.9	25	19	38	-	76	-	51	-
25	33.7	32	22	38	25	76	51	56	41
32	42.4	38	25	48	32	95	64	70	52
40	48.3	45	29	57	38	114	76	83	62
50	60.3	57	35	76	51	152	102	106	81
65	76.1(73)	76	44	95	64	191	127	132	100
80	88.9	89	51	114	76	229	152	159	121
90	101.6	-	57	133	89	267	178	184	140
100	114.3	108	64	152	102	305	203	210	159
125	139.7	133	79	190	127	381	254	262	197
150	168.3	159	95	229	152	457	305	313	237
200	219.1	219	127	305	203	610	406	414	313
250	273.0	273	159	381	254	762	508	518	392
300	323.9	325	190	457	305	914	610	619	467
350	355.6	377	222	533	356	1067	711	711	533
400	406.4	426	255	610	406	1219	813	813	610
450	457.2	478	286	686	457	1372	914	914	686
500	508.0	529	318	762	508	1524	1016	1016	762
550	559	-	343	838	559	Note: 1) Does not use in the parenthesis as far as possible the value. 2) Preferred to choose A series.
600	610	630	381	914	610
650	660	-	406	991	660
700	711	720	438	1067	711
750	762	-	470	1143	762
800	813	820	502	1219	813
850	864	-	537	1295	864
900	914	920	568	1372	914
950	965	-	600	1448	965
1000	1016	1020	632	1524	1016
1050	1067	-	660	1600	1067
1100	1118	1120	695	1676	1118
1150	1168	-	727	1753	1168
1200	1220	1220	759	1829	1219

Elbow 45°, 90 °, 180 °

Butt welded elbow 45°, 90 °, 180 °(GB)

Butt welded elbow 45°, 90 °, 180 °(ASME/ANSI B 16.9S B16.28)

Nominal Pipe size DN	End outside diameter	Center to end			Center to center		Back to faces
		45° Elbows	90° Elbows		180° Elbows
		H	F		P		K
		Long radius	Long radius	Short radius	Long radius	Short radius	Long radius	Short radius
1/2	21.3	15.7	38.1	一	76.2	-	47.8	-
3/4	26.7	19.1	38.1	一	76.2	-	50.8	-
1	33.4	22.4	38.1	25.4	76.2	50.8	55.6	41.1
1l/4	42.2	25.4	47.8	31.8	95.3	63.6	69.9	52.3
11/2	48.3	28.4	57.2	38.1	114.3	76.2	82.6	62.0
2	60.3	35.1	76.2	50.8	152.4	101.6	106.6	81.0
21/2	73.0	44.5	95.3	63.5	190.5	127.0	131.8	100.1
3	88.9	50.8	114.3	76.2	228.6	152.4	158.8	120.7
31/2	101.6	57.2	133.4	88.9	266.7	177.8	184.2	139.7
4	114.3	63.5	152.4	101.6	304.8	203.2	209.6	158.8
5	141.3	79.2	190.5	127.0	381.0	254.0	261.9	196.9
6	168.3	95.3	228.6	152.4	457.2	304.8	312.7	236.5
8	219.1	127.0	314.8	203.2	609.6	406.4	414.3	312.7
10	273.1	158.8	381.0	254.0	762.0	508.0	517.7	390.7
12	323.9	190.5	457.2	304.8	914.4	609.6	619.3	466.9
14	355.6	222.3	533.4	355.6	1066.8	711.2	711.2	533.4
16	406.4	254.0	609.6	406.4	1219.2	812.8	812.8	609.6
18	457.2	285.8	685.8	457.2	1317.6	914.4	914.4	685.8
20	508.0	317.5	762.0	508.0	1524.0	1016.0	1016.0	762.0
22	558.8	342.9	838.2	558.8	1676.4	1117.6	1117.6	838.2
24	609.6	381.0	914.4	609.6	1828.8	1219.2	1219.2	914.4
26	660.4	406.0	990.6	Note: The long radius elbow in the table is taken from ASME/ANSI B16.9, and the short readius elbow is taken from ASME/ANSI B16.28.
28	711.2	438.2	1066.8
30	762.0	469.9	1143.0
32	812.8	501.7	1219.2
34	863.6	533.4	1295.4
36	914.4	565.2	1371.6
38	965.2	599.9	1447.8
40	1016.0	632.0	1524.0
42	1066.8	660.4	1600.2
44	1117.6	695.5	1676.4
46	1168.4	726.9	1752.6
48	1219.2	758.9	1828.8

45 ° Elbow with internal thread

Main outer size

SIZE	Ø1	Ø2	A	B	K
1/2	26.9	24.9	21	3	1.5
3/4	31.9	29.9	25	7	1.5
1	39.9	37.9	29	8	1.5
1 1/4	48.9	46.4	33	9	2
1 1/2	55.4	52.9	37	10	2
2	67.4	64.9	42	11	2

90 ° Elbow with internal thread

Main outer size

SIZE	Ø1	Ø2	C	A
1/8	13.9	12.2	5.5	17
1/4	16.9	14.9	6	19
3/8	20.2	18.4	6	23
1/2	26.9	24.9	6	27
3/4	31.9	29.9	7	31.5
1	39.9	37.9	8	36.5
1 1/4	48.9	46.4	9	42.5
1 1/2	55.4	52.9	10	47.5
2	67.4	64.9	11	56
2 1/2	84.5	82	13	68
3"	98.5	95.5	15	77.5

90 ° Elbow with inner and outer thread

Main outer size

SIZE	ø1	ø2	Ø3	A	B	C	D
1/8	13.9	8	10.2	17	24	5.5	7
1/4	16.9	10.7	13.5	20	28	6.5	10
3/8	20.2	14.2	17.2	23	32	7	10
1/2	26.9	17.8	21	28	37	7	13
3/4	31.9	22.8	26.6	32	43	8	15
1"	39.9	28.7	33.6	38	52	10	17
11/4	48.9	37.3	42.4	43	59	11	19
11/2	55.4	43.8	48.4	48	64	12	19
2"	67.4	55.3	60.3	57	74	13	24

90 ° reducing elbow

Main outer size

SIZE	Ø1	Ø2	Ø33	Ø4	A	B	C	D	E	F
3/8*1/4	20.2	18.4	16.9	14.9	20		6	22	6
1/2*1/4	26.9	24.9	16.9	14.9	22	9.5	6	25	6
3/4*3/8	31.9	29.9	20.2	18.4	26	11.5	7	28	6
3/4* 1/2	31.9	29.9	26.9	24.9	29	11.5	7	30	6	9.5
1*1/2	39.9	37.9	26.9	24.9	32	14	8	34	6	9.5
1*3/4	39.9	37.9	31.9	29.9	34	14	8	36	7	11.5
11/4*1/2	48.9	46.4	26.9	24.9	33	15	9	38	6	9.5
11/4*3/4	48.9	46.4	31.9	29.9	36	15	9	40	7	11.5
11/4*1/2	48.9	46.4	39.9	37.9	40	15	9	42	8	14
11/2*1/2	55.4	52.9	26.9	24.9	35	17	10	41	6	9.5
11/2*3/4	55.4	52.9	31.9	29.9	38	17	10	43	7	11.5
11/2*1/2	55.4	52.9	39.9	37.9	42	17	10	45	8	14
1/2*11/4	55.4	52.9	48.9	46.4	46	17	10	47	9	15
2*1/2	67.4	64.9	26.9	24.9	35	17	11	47	6	9.5
2*3/4	67.4	64.9	31.9	29.9	38	17	11	49	7	11.5
2*1	67.4	64.9	39.9	37.9	42	17	11	51	8	14
2*11/4	67.4	64.9	48.9	46.4	46	17	11	53	9	15
2*11/2	67.4	64.9	55.4	52.9	49	17	11	55	10	17

Clamped elbow 90°

Size	L	R	Ø1	Ø
1/2"	40.5	19.1	34	12.7
3/4"	50	28.5	50.5	19
1"	55	38.1	50.5	25.4
1-1/2"	59.5	47.7	50.5	31.8
1-3/4"	70	57.2	50.5	38.1
2"	82	76.2	64	50.8
2-1/2"	105	95.3	77.5	63.5
3"	110	114.3	91	76.2
3-1/2"	125	113.3	106	88.9
4"	148.5	152.4	119	101.6
6"	250.8	228.6	168&183	159

Product Description:

The company mainly produces and processes elbow: all kinds of stainless steel, carbon steel products, can also come to map to sample customized all kinds of non-standard products!

[standard] national standard, American Standard, Japanese standard, German standard, GB, SMS, 3a, BPE, BS, DIN, JIS, etc

[material] 201, 304, 304L, 321, 316L, 301, etc

[Specification] 45 ° elbow, 90 ° elbow, 180 ° elbow, various thickness 1 ″ ~ 6 ″, various diameter DN 10-dn 600 elbow, etc

[connection mode] internal and external thread, clamp type, butt welding type, etc

[optional process] polishing (mirror, rough polishing, matte), pickling, sanding, baking, wire drawing, etc

All the products in the shop are sold directly by the manufacturer, with low price, good quality and excellent workmanship, which is worthy of your trust!

Application:

Through the selection of different structural forms and materials, it can be widely used in water, steam, oil, acid, alkali and other media.

It mainly used in food, beverage, chemical industry and other fields; it is a connecting fitting of tank and pipeline.

Price

Our price fluctuates with raw materials and exchange rate.Please leave your contact information and give you a new quotation as soon as possible.

Packing

wooden case, wooden pallet or packing method specified by customers.

Hot Tags: elbow 45 90 180 degree, China, suppliers, manufacturers, customized, wholesale, quotation, low price, in stock, made in China, Stainless Steel Round Flanged Sight Glass, TS Filter Gas Cartridge, Flanged Carbon Steel Swing Check Valve, Sanitary Stainless Steel Round Manhole Cover, JIS 5K 10K 20K Flanges, Industry Ball Valve Quick Install

Elbow 45 90 180 Degree